Incorrect sensor names on ADC

I recently replaced some sensors, currently ADC lists one of the new sensors as the wrong identity/name. Sensor ID 23 shows up in ADC as “Basement Motion”, however the sensor type is Door/Window…it is named correctly on the panel, and whenever the panel lists the sensor activity it shows it correctly as the Front Door.

I attempted to run a test of the cellar connectivity and the dual-path connectivity, however nothing changed on ADC.

Was ID 23 listed as Basement Motion previously before switching sensors? Typically a cell test will sync names but in a case where the name has not synced, you will want to make the change in ADC directly. This can be accomplished by navigating to ADC ->Settings->Devices->Devices-> and updating the zone name accordingly.