Hey guys, just got my new IQP2+ setup and was excited to see support for partitions as I’d like to setup a new garage apartment on a separate partition. I was able to enable them and modify the name of the first default partition successfully but I can’t figure out how to add more. Do I need a remote panel before I can add more?
Can you use partitions without having to enter an access code for panel access?
I notice ADC shows my default partition name, but how are multiple controlled via website and app?
Thanks!
Okay, should’ve RTFM. I see that partitions don’t show up until they have at least one sensor learned into them. I also found examples of multiple partitions at ADC.
Okay, should’ve RTFM. I see that partitions don’t show up until they have at least one sensor learned into them. I also found examples of multiple partitions at ADC.
Not a problem! Yes, you would need to have sensors learned into the additional partition to view and control.
You can rename your new partition on the Alarm.com website by the following:
In the Panel card, click the arrow.
Click the configure gear.
In the Device Name field, enter the new name for the panel partition.
Close the System Settings window to save the change.
You can arm and disarm partitions individually in the website and app.