Driveway Gate with ADC

I see old threads from 2015, but does Alarm.com have anything now that will integrate with some type of gate control? Most gates have a keypad and it would be great if the ADC codes programmed for users in ADC can also control the gate opening.

Technically, MyQ enabled Gate Openers are available, but you would need to replace your Opener to take advantage of this.

No garage keypad can be programmed through the Alarm.com interface. Codes would be programmed locally, with remote control of the gate as well as current status available through ADC.

Bumping up an old thread but if you have a Liftmaster MyQ driveway gate it can be paired with ADC. I just had the Liftmaster CSL24V installed on a 22’ driveway gate and was able to pair it with the internet gateway/ADC using the instructions from the gate to pair. You’ll need to add it as a new door from the Alarm.com website by going to Settings>Devices>Liftmaster Installation. Select “MyQ-Enabled garage door opener” to set the internet gateway in learn mode then follow the 1 of the 2 following methods to get it to learn to gateway and ADC.
https://youtu.be/UtfgugUSehA?t=75

From there you can open and close the gate from your phone and setup all sorts of automation and notifications for the gate:)